Elven ranger's outfit

Strange feeling, to stick to those typical fantasy character-classes from long time ago when your current characters tend to be mostly historic... Anyway, as the first and second fighter's outfit for my elven ranger were either inacceptably horrid (means not creative at all, apart from some embroidery) or torn, I felt kind of forced to come up with a new outfit. Quickly. Veeery quickly.

I went for a range of matching browns and greens for an under-tunic, a jacket and trousers. And to distance the elven style from normal medieval or other garments, I decided to make all the parts leaf-shaped to some degree - apart from the elvish embroidery that is to follow. My mistake with the first elven outfits was to stick too closely with average patterns and shapes. But to design garments for a completely different culture deserves some thought of the background and ideas for new shapes.

The under-tunic is from lightweight cotton in a warm, reddish brown. Front and back are roughly leaf-shaped, the point will show beneath the leaf-shaped side panels of the jacket. The sleeves are slightly overlong and cut straight. To fit them under the tighter sleeves of the jacket I sewed in narrow tucks up to the elbow which add to the extravagant appearance I want to create.

The jacket is based on leaf-shapes in general. The basis aren't front and back pieces, but two leaf-shaped side-pieces that overlap at the back where they are sewn together, and at the front where they close with braid fastenings. I even managed to make a cut-on standing collar just so. Amazing what I'm capable of once I'm stressed and can't afford time for thinking! :D

The sleeves are split into an upper and lower part. The lower part is cut in leaf-shape (surprise...) and rolled around the arm to be sewn together by hand. The pattern is my own design. Here it is, as well as one finished sleeve and the second one in the process of growing.

The upper sleeve part is just there to connect it with the body part and is therefore nothing special, just a short sleeve matched to fit the leaf component.

The embroidery of this jacket is a bramble-blackberry-design, as my elf once got caught in a bramble thicket (wearing her court robe; that happens if you put a ranger into a court gown and let her romp off into the woods, drunk!), so now it's a running gag between her and her companion that she has a special fondness for brambles... ^^

Briefcase/wallet turned into notebook

Let's face it: LARPs are usually just one huge mystery/secret/crime/scheme to be uncovered and solved. And as we don't have the trained short-term memory our illiterate ancestors long ago tended to have, we need to jot down the odd name or idea lest we forget it when it might come in handy to solve the plot. In style, of course - no plastic pens and spiral-bound notebooks. So here's a short tutorial on how to turn a leather briefcase into a very pretty notebook in almost no time.

On a flea market I bought three (I know, one would have been enough, but I found them SO pretty and practical!) of those very nice leather wallets (rather large specimens) that even have a little pouch worked into one of the sections. Cut away the gruesome plastic in one section where I intended to put the booklet.

Measure the size of your briefcase you want to use, and cut the paper according to it. If you use thick paper, 12 layers will suffice, if you use something like normal printing paper, you could go up to 24 layers or so. Fold the stack of paper neatly in half and punch four holes in the fold with an awl or a thick needle. Now sew the sheets together with yarn: beginning from the outside, go in, out the next hole, in the following and out again the last one. To bring the ends of the yearn closer together and strengthen the whole binding, go in once again and out through the two centre holes. Tighten the thread and knot it at the back of the booklet.

Put the booklet in the place where you want it to be in the briefcase. Mark the place of the holes with your awl or needle and punch them.

Take a double length of yarn now for additional strength and sew the paper into the wallet the same way you bound the booklet. Knot and draw the ends through and behind the paper.

That's it!

On starching fabric

I never knew it would be that practical! But after trying every theatre-trick from heavy fabric and wired seams to iron-on interfacing to get nicely shaped collars and all, I decided to use old-fashioned starch. My only experience so far has been with potato-starch, but it worked nicely and I didn't discover any disadvantages so I guess I'll stick with it. The starch-water-ratio may vary, depending on the size of your spoons and the thickness of the starch you want to produce, but all in all it has proven best to make some heavy starch basis that can be diluted to get the desired mixture.

1 litre of water
4 teaspoons (!) of starch (NOT tablespoons; you'll end up with a bowl of goo)

Mix the starch with some cold water. You'll get a whiteish puree. Pour in the cooking water and stir well to avoid the forming of lumps which you won't want to sit on your fabric. The white starch will turn into a rather clear liquid. If it's still too gooey you can add water until you've reached the desired consistency. If there are too many lumps in it you can put it through a fine sieve before putting in the clothes.

Put the damp fabric into the starch for a moment, squeeze the excess water out gently (you don't want to end up with wrinkles in your collar) and lay the piece flat, allowing excess water to drip off. Dry it quickly, either in the sun or on the heating, and when it's only damp, iron it into the desired shape.

PS: It even worked very well to get the crispness back into tulle that I had had to wash, as well as into dupion silk that had turned a little limp after washing. And if you use too much starch, you'll be able to design an origami dress... ;)